How to fix cloudy hot water
If your water is cloudy, it means there is something in it that is not supposed to be there. This could be dirt, rust, or other particles. You will need to remove these particles before you can enjoy hot water again. Cloudy hot water is a common problem, but it can be easily fixed by adding a few ingredients. In this post, the author discusses how to clear up cloudy hot water using simple methods.
Why is my hot water cloudy
The cloudiness in your hot water could be due to a number of factors, such as sediment or rust buildup in your water heater, or lime scale deposits. If you are unsure of the cause, it is best to consult a professional to help get to the bottom of it.
Check the water heater’s settings – it may be set to “hot” instead of “warm”
If your water heater’s thermostat is set to “hot,” the water inside it will be heated to a temperature that is too high. This can cause the minerals in the water to become dissolved, which will then make the water appear cloudy. To fix this, simply adjust the thermostat to the “warm” setting. If you’re not sure what the water heater’s settings are, check the manufacturer’s instructions. Some water heaters have a “warm” setting that will produce water at a lower temperature than the “hot” setting.
Check the gas pressure
If the gas pressure in your water heater is too high, it can also cause the water to become cloudy. To fix this, you will need to adjust the gas pressure to the recommended level. The recommended level will vary depending on the make and model of your water heater, so you will need to consult the manufacturer’s instructions.
Clean the water heater
If the cloudiness in your hot water is due to sediment or rust buildup, you will need to clean the water heater. First, turn off the power to the water heater. Then, drain the water from the tank and flush it out with a garden hose. Next, mix up a solution of 1 part bleach to 10 parts water and use it to scrub down the inside of the tank. Finally, refill the tank with fresh water and turn the power back on.
Replace the water filter if it’s been more than six months since it was last replaced
Water filters play an important role in keeping your water clean and safe to drink. Over time, they can become clogged with dirt and debris, which can reduce their effectiveness. For this reason, it’s important to replace them every six months or so. If you’re not sure when your filter was last replaced, check the manufacturer’s instructions. Some filters have a “change” indicator that will let you know when it’s time for a new one.
Flush the water heater tank to remove any built-up sediment
One way to remove the particles that are causing your water to be cloudy is to flush the water heater tank. This will remove any sediment that has built up in the tank. To do this, simply turn off the power to the water heater and open the drain valve. Allow the water to run until it is clear. You may need to do this a few times to get all of the sediment out of the tank.
Insulate the water heater tank with a thermal blanket
If you want to take additional steps to prevent your water heater tank from becoming clogged with sediment, you can insulate it with a thermal blanket. This will help keep the water warm and prevent the formation of any ice crystals, which can also cause sediment to accumulate.
Repair any leaks in the plumbing system
Leaks in the plumbing system can also cause your water to be cloudy. If you find any leaks, be sure to repair them as soon as possible. This will help keep your water clean and clear.
About The Author
How to Plan and Budget for Major Home Renovation 
Repairs to Make Before Selling Your Home 
5 Reasons to Upgrade Your HVAC System Before Winter