Fixing a Broken Toilet Seat is Easier Than You Think

If your toilet seat is loose or broken, it can be fixed easily with a few tools and materials. You will need:

• A screwdriver
• A hammer
• Pliers
• A new toilet seat

First, remove the old toilet seat by unscrewing the bolts that hold it in place. If the bolts are rusted, you may need to use pliers to loosen them. Once the bolts are removed, lift off the old seat and set it aside. Next, clean the area where the new seat will be installed. This will help ensure that the new seat is securely attached. Now, place the new toilet seat on the bowl, lining up the bolt holes with the holes in the bowl. Insert the bolts and tighten them with a screwdriver. If the bolts are too long, you can trim them with a hacksaw.

How to fix a toilet seat

If your toilet seat is broken, don’t despair! It’s actually not that difficult to fix. In most cases all you’ll need is a screwdriver and a few minutes of time. Simply follow the steps below and you’ll have your toilet seat as good as new in no time.

1. Start by removing the screws that hold the seat in place. If your seat is attached with bolts, you’ll need to use a wrench or pliers to loosen them.
2. Once the screws are removed, lift the seat off of the toilet.
3. Inspect the seat to see what type of damage it has sustained. If there are just a few cracks or chips, you may be able to repair them with epoxy or another type of glue. However, if the damage is more significant, you’ll likely need to replace the entire seat.
4. Once you’ve determined what needs to be done, head to your local hardware store or home improvement center. They’ll have a variety of toilet seats to choose from, so you can find one that matches your bathroom’s décor.
5. If you’re replacing the entire seat, be sure to get one that’s the same size and shape as your old one.
6. Installing a new toilet seat is easy. Simply line up the holes with the bolts on the toilet, then tighten the screws or bolts until the seat is secure.

Shut off the water supply to the toilet tank by turning the valve behind the toilet clockwise.

• Flush the toilet to empty the tank, then remove the remaining water by holding a cup or bucket under the open valve and turning it counterclockwise until no more water comes out.
• Detach the supply line from the fill valve at the base of the tank.
• Remove any bolts that are holding the tank to the bowl, then lift the tank off of the bowl and set it aside.
• Locate the broken flush valve inside the tank and remove it. Take it to your local hardware store so you can find a replacement that’s the same size and style.
• To install the new flush valve, simply reverse the steps you used to remove the old one.
• Once the new flush valve is in place, reattach the tank to the bowl and turn on the water supply.
• Test the flush valve by flushing the toilet. If it doesn’t work properly, you may need to adjust it according to the manufacturer’s instructions.

About The Author

Jules Perosky

Jules is a professional writer and blogger from the United Kingdom currently residing in Spain. He is an experienced interior designer, with a keen eye for aesthetic excellence. Jules has been writing about home design and lifestyle for more than 4 years; he is passionate about all things related to home decor and loves to share his experiences through his blog.

See author's posts