The Quickest Way to Install a New Toilet Seat

Replacing a toilet seat is usually a pretty straightforward affair. But if you’re not careful, it can be easy to end up with a wobbly seat that feels like it’s about to come crashing down every time you sit on it.

Which toilet seat is best for you- one with a slow close or standard hinge

What’s the difference between a round and elongated seat? We break it all down, so you can make an informed decision.

Toilet seats come in two basic shapes-round and elongated (oval). Most toilets are round, but if you have a toilet with an oval bowl, you’ll need an elongated seat. To figure out which type you need, simply measure the distance from the front of the bowl to the back. If it’s less than 18 inches, you need a round seat. If it’s 18 inches or more, you need an elongated seat.

When it comes to toilet seats, there are two main types of hinges-standard and slow close

• Standard hinges are the most common and are usually less expensive.
• Slow close hinges are designed to prevent the seat from slamming down, which can be handy if you have kids or tend to be a bit forgetful.

The next thing to consider is material. Toilet seats are typically made from either plastic or wood. Plastic seats are usually less expensive, but they can be more prone to cracking and breaking. Wood seats are typically more expensive, but they’re also more durable.

Where to buy a quality toilet seat at an affordable price

If you’re looking for a quality toilet seat at an affordable price, we recommend checking out the selection at your local home improvement store. There are also a number of online retailers that sell toilet seats, and you can often find good deals on sites like Amazon.com.

What type of screws or bolts are needed to install the seat

The final thing to consider is installation. Some seats come with everything you need to install them, while others require you to purchase screws or bolts separately. Be sure to check before you buy to avoid any surprises down the road.

When it comes to installing a new toilet seat, the first thing you’ll need to do is remove the old seat. This is usually just a matter of unscrewing the bolts that hold it in place.

If you’re having trouble removing the old seat, you may need to use a screwdriver or pliers to loosen it. Once the old seat is out, you can start installing the new one.

How to install a toilet seat

Installing a new toilet seat is a pretty simple affair- just follow these steps and you’ll be done in no time.

1. Remove the old seat by unscrewing the bolts that hold it in place. If your toilet doesn’t have bolts, you may need to use a putty knife to pry the seat off.

2. Clean the area around the bolt holes with a rag or brush to remove any debris or build-up.

3. Line up the new seat with the bolt holes and press it into place.

4. Screw in the bolts (or use the included clips) to secure the seat. Be sure not to overtighten, as this can strip the threads or break the seat.

5. That’s it! Your new toilet seat is now installed.

With these easy steps, you’ll have your new toilet seat installed in no time. Just be sure to take your time and follow the instructions carefully to avoid any accidents.

Installing a new toilet seat is usually a pretty straightforward affair. But if you’re not careful, it can be easy to end up with a wobbly seat that feels like it’s about to come crashing down every time you sit on it.

About The Author