You love your jetted tub. It’s the perfect way to relax after a long day. But over time, your tub can start to develop a build-up of grime and gunk around the jets. This can not only be unsightly, but it can also affect the performance of your tub and make it less enjoyable to use.
How to Remove Bathtub Jet Covers
Fortunately, it’s relatively easy to clean your tub and keep it looking its best. One important step is to remove the jet covers and give them a good cleaning. This will help ensure that the jets themselves are clear of any build-up and can function properly. Here’s a quick guide on how to remove bathtub jet covers:
- Start by shutting off the power to your tub. This is generally done by flipping a switch near the tub or by unplugging it from the wall outlet.
- Next, you’ll need to remove any dirt and debris that may be on the surface of the jet covers. A soft cloth or a brush can be used for this.
- Once the surface is clean, locate the screws that hold the jet covers in place. These are typically located around the perimeter of the cover.
- Use a screwdriver to remove the screws and then lift off the jet covers. If they’re stubborn, you may need to use a pry bar or a putty knife to help loosen them.
- Once the covers are off, take a look at the jets themselves. If there’s any build-up around them, use a soft brush or cloth to clean it away.
- Finally, replace the jet covers and screw them back into place. Then turn on the power to your tub and enjoy a relaxing soak.
What Jet Tub Gunk is and What it Does
Jet tub gunk is a black, tarry substance that can build up in your jetted tub over time. This gunk is made up of a combination of soap scum, body oils, and dirt that gets trapped in the jets. While it may not seem like a big deal, this build-up can actually cause some serious problems for your tub and your health.
If left unchecked, jet tub gunk can lead to clogged jets, which can reduce the effectiveness of your tub’s massage function. In extreme cases, clogged jets can even cause the pump to overheat and break down. Additionally, this build-up can provide a breeding ground for bacteria and mold, which can cause respiratory problems and skin irritation.
Tips for Keeping Your Jetted Tub Clean
- Use distilled water in your tub. This will help prevent the build-up of minerals that can contribute to jet gunk.
- Clean your tub regularly with a mild soap or cleaning solution. Be sure to clean around the jets and pay special attention to any nooks and crannies where gunk can hide.
- Use a jet cover. This will help keep dirt and debris out of the jets, making it easier to keep them clean.
- Drain and clean your tub according to the manufacturer’s instructions. This will help remove any built-up gunk and prevent it from getting worse.
- Have your tub serviced regularly by a qualified technician. This will ensure that your tub is in good working condition and help prevent problems down the road.