The complete guide to installing stair stringers
This guide will show you how to install stair stringers in your home.
We’ll cover everything from measuring and cutting the lumber to attaching it to your stairs. With this guide, you’ll be able to install stair stringers like a pro!
What are stair stringers and what do they do
Stair stringers are the wooden beams that support the steps of your stairs. They are usually made from 2×12 lumber, and they typically come in a kit with everything you need to install them.
If you have a staircase in your home, then you need stair stringers. Without them, your staircase would collapse. So, if you’re planning on installing a staircase, make sure you get a good quality stair stringer kit.
How do I measure for stair stringers
The first step in installing stair stringers is to measure the distance from the top of the stairs to the bottom. You’ll also need to measure the width of the stairs.
Once you have these measurements, you can cut the lumber to size. Be sure to use a saw that is designed for cutting lumber, such as a circular saw.
how to install stair stringers
Once you have the lumber cut to size, it’s time to install it. First, you’ll need to attach the stringers to the top of the stairs. You can do this by screwing them into the wood. Next, you’ll need to attach the stringers to the bottom of the stairs. You can do this by nailing them into place.
Finally, you’ll need to install the risers. The risers are the boards that go between the steps. You can install them by screwing them into place. Be sure to follow all of the instructions carefully, and you’ll be able to do it in no time.
How to cut your stair stringer lumber
When you’re ready to cut your lumber, it’s important to use the right tools. For this job, you’ll need a saw that is designed for cutting lumber. A good choice would be a circular saw. Once you have the right saw, you can measure and mark the lumber. Be sure to use a straight edge to get accurate measurements. After you’ve measured and marked the lumber, you can cut it to size.
You can do this by sawing through the wood with your saw. Be sure to make smooth, even cuts. Cut slowly and be careful not to damage the lumber. Once you’ve cut all of the lumber to size, you’re ready to install it.
Common mistakes when installing stair stringers
One of the most common mistakes people make when installing stair stringers is not attaching them securely. If the stringers are not attached properly, they can easily come loose and cause the stairs to collapse. Be sure to use screws or nails that are long enough to go through the lumber and into the stairs.
Another common mistake is not level when installing the stringers. If the stringers are not level, the stairs will be uneven and could be dangerous. Be sure to use a level when attaching the stringers. Finally, some people forget to install the risers. The risers are the boards that go between the steps. They provide support for the steps and make the stairs more stable. Be sure to install the risers before you use the stairs.
How much does it cost to call a professional service
The average cost to install stair stringers is $200-$300. However, the cost will vary depending on the size and complexity of the staircase. If you have a large or complex staircase, you may need to hire a professional contractor. The cost to hire a professional contractor can range from $500-$1,000. We recommend that you get estimates from multiple contractors before hiring one.
Installing stair stringers is a simple job that anyone can do. Just be sure to measure the stairs, cut the lumber to size, and attach the stringers securely. If you’re not confident in your ability to do it, we recommend that you hire a professional contractor.
About The Author
How to Plan and Budget for Major Home Renovation 
Repairs to Make Before Selling Your Home 
5 Reasons to Upgrade Your HVAC System Before Winter